There would be some situations where you need to setup the wireless network using a wireless router by visiting the administrative website 192.168.1.1. Some may probably try 192.168.l.l or 192.168.0.1. All these configuration websites are dependent, and they will change from vendor to vendor. For example, in the case of Netgear Router, you should enter 192.168.1.1 or a website routerlogin.net which resembles the same IP address. Entering the default IP address is not a big task. Every router owner can find the same within the router manual that come with the retail package. So, how can you access your router with 192.168.1.1 or 192.168.l.l? Let me tell you the steps in detail.
First of all, you need to follow the below steps carefully to know on how to setup the wireless router using 192.168.1.1 default IP address.
How to Get RouterLogin Page using 192.168.1.1?
Step 1: Connect the router in the way as it should be
- There are two kinds of connections. One using Modem and another is just connecting the router to the line. If you have a modem, then first connect the modem to the line, and in series join the modem to the router. Otherwise, just connect the router alone to the line to establish a healthy connection when accessed via routerlogin.net website or 192.168.1.1.
Step 2: Enter 192.168.1.1 or Routerlogin.net website
- Once you connect the router as desired, you need to enter 192.168.l.l in the address bar. As the router’s default IP is same, it should bring you the administrative dashboard in just a few seconds. If it takes a while, then you need to check the network adapter settings of the PC or the connections in step 1.
Step 3: Setup the Wireless Router Easily
- Once you’re in the admin panel, change the settings as you like. All the router modifications should be done here and the changes will reflect instantly after saving them.
Step 4: Restart the Router
- After doing the necessary changes, you must reboot the router via the routerlogin panel. It will take a minute to take the changes into effect.
Finally, it is must to get access to the router admin panel through 192.168.1.1 as it is the only way to configure the wireless router. Feel free to contact us for any queries.